Skip to main navigation Skip to main content Skip to page footer
Polish
ET0250.040

ET0250.040

Stay variant 040 – with lamellae in the inner radius

Właściwości

  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Lamellae can be swivelled at any position on one side
  • Inside: swivelling.
Układ na każdym ogniwie
Bi 30 - 50 mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Design 040 is not suitable for gliding arrangements.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">25</td> <td class="hi red">16.5</td> <td class="hg">23</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 10</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">0.32 – 0.36</td> </tr> </tbody> </table>
Bi [mm]
30 50
KR [mm]
28 38 45 60 75 100

Przykład zamówienia

ET0250
Typ
•
040
Wariant poprzeczki
•
50
B [mm]
•
75
KR [mm]
-
1100
Lk [mm]
VS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A364––
B3642–

Przykład zamówienia

TS0
System przegródek
•
A
Wersja
•
3
n

Please state the designation of the divider system (TS0), the version, and the number of dividers per cross section [nT]. You are welcome to add a sketch to your order.

Złączki końcowe Złączki końcowe

Bi
[mm]		BEF
[mm]		nz
30402
50604

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Przykład zamówienia

End connector
End connector
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia