Stay variant 040 – with lamellae in the inner radius
Właściwości
Weight-optimised plastic frame with particularly high torsional rigidity.
Lamellae can be swivelled at any position on one side
Inside: swivelling.
Układ na każdym ogniwie
Bi
15 - 65
mm
Wymiary
Wymiary
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Design 040 is not suitable for gliding arrangements.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table">
<thead>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<th class="t"><strong>t</strong><br>[mm]</th>
<th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th>
<th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<!-- Bk und BEF für alle Ketten -->
<th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th>
</tr>
</thead>
<tbody>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<td class="t">32</td>
<td class="hi red">18</td>
<td class="hg">25.5</td>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<!-- Bk und BEF für alle Ketten -->
<td class="bk">Bi + 12</td>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="qk">0.35 – 0.45</td>
</tr>
</tbody>
</table>
Bi [mm]
15
25
38
50
65
KR [mm]
28
38
48
75
100
125
Przykład zamówienia
ET0320
Typ
•
040
Wariant poprzeczki
•
50
B [mm]
•
100
KR [mm]
-
1280
Lk [mm]
VS
Układ poprzeczek
Podział wewnętrzny
Podział wewnętrzny
Divider systems
The divider system is mounted on every 2nd chain link as a standard.
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).
Divider system TS0 without height separation
Vers.
aT min [mm]
ax min [mm]
ac min [mm]
nT min
A
4
8
6
–
The dividers can be moved in the cross section.
Przykład zamówienia
TS0
System przegródek
•
A
Wersja
•
3
n
Please state the designation of the divider system (TS0), the version, and the number of dividers per cross section [nT]. You are welcome to add a sketch to your order.
Złączki końcowe
Złączki końcowe
Bi [mm]
BEF [mm]
nz
15
27
2
25
37
3
38
50
4
50
62
5
65
77
6
The end connectors are also available as an option without integrated strain relief. Please state when ordering.
Connection point F – fixed point M– driver
Connection type A – threaded joint outside (standard) I – threaded joint inside H – threaded joint, rotated 90° to the outside K – threaded joint, rotated 90° to the inside
