Skip to main navigation Skip to main content Skip to page footer
Polish
KE0650 RE

KE0650 RE

Plastic stay RE – screw-in frame stay

Właściwości

  • Plastic profile bars for light and medium loads. Assembly without screws.
  • Available customized in 8 mm grid.
  • Outside/inside: to open by rotating 90°.
Poprzeczki co 2 ogniwo,
Układ na każdym ogniwie
Bi 68 - 260 mm w 8 sekcje szerokości mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">65</td> <td class="hi red">42</td> <td class="hg">57.5</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 28</td> <td class="bef">Bi + 36</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">1.75 - 2.71</td> </tr> </tbody> </table>
Bi [mm] *
68 76 84 92 100 108 116 124 132 140
148 156 164 172 180 188 196 204 212 220
228 236 244 252 260
* w8 sekcje szerokości mm
KR [mm]
75 115 145 175 200 300

Przykład zamówienia

KE0650
Typ
•
140
B [mm]
•
RE
Wariant poprzeczki
•
115
KR [mm]
-
2600
Lk [mm]
HS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

The divider system is mounted on each crossbar as a standard – on every 2nd chain link for stay mounting (HS – halfstayed). As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed by turning the frame stay by 180°. The arresting cams click into place in the locking grids in the crossbar (version B). The groove in the frame stay faces outwards.

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A6.5138.8–2
B131611.882

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A6.5138.8–2

The dividers can be moved in the cross section.

Divider system TS3
with height separation consisting of plastic partitions

Vers.aT min
[mm]		ax min
[mm]		ax grid
[mm]		nT min
A416/42*82

* For aluminum partitions

The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.

Aluminum partitions in 1 mm increments with ax > 42 mm are also available.

ax (centre distance of dividers) [mm]

ac (nominal width of inner chamber) [mm]

161823283233384348586468
81015202425303540505660
78808896112128144160176192208 
70728088104120136152168184200 

When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 4 mm). Twin dividers are also suitable for retrofitting in the partition system.

Przykład zamówienia

TS3
System przegródek
•
A
Wersja
•
3
n
•
K1
•
K4
Komora
•
34
•
38
a
-
VR1
-
VR3
Separacja wysokości

Please state the designation of the divider system (TS0, TS1,...), the version, and the number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax].

If using divider systems with height separation (TS1 – TS3), please also state the positions (e.g. VD23) viewed from the left driver belt. You are welcome to add a sketch to your order.

Złączki końcowe Złączki końcowe

Connection point
F – fixed point
M – driver

Connection type
U – Universal mounting bracket

Przykład zamówienia

UMB
UMB
Złączka końcowa
•
F
•
M
Punkt połączenia
U
U
Typ połączenia

We recommend the use of strain reliefs at the driver and fixed point.