Skip to main navigation Skip to main content Skip to page footer
Polish
MC1250 RMR

MC1250 RMR

Aluminum stay RMR – Frame rolling stay

Właściwości

  • Aluminum profile bars with rotating plastic rolling stay for highest requirements with gentle cable guiding. Double threaded joint on both sides.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Poprzeczki co 2 ogniwo,
Układ na każdym ogniwie
Bi 100 - 800 mm w 1 sekcje szerokości mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
For rough environmental conditions, we recommend the use of OFFROAD glide shoes with 80 % higher wear volume.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <th class="hgdashoffroad"><strong>h<sub>G'</sub> Offroad</strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi red"><strong>B<sub>i</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <th class="dr"><strong>d<sub>R</sub></strong><br>[mm]</th> <th class="st"><strong>ST</strong><br>[mm]</th> <th class="atmin"><strong>a<sub>T</sub> min</strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">125</td> <td class="hi red">66</td> <td class="hg">96</td> <td class="hgdash">99.5</td> <td class="hgdashoffroad">103</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi red"> 100 - 800 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 45</td> <td class="bef">Bi + 45</td> <td class="dr">10</td> <td class="st">6</td> <td class="atmin">6.5</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">4,13 – 8,39</td> </tr> </tbody> </table>
* w1 sekcje szerokości mm
KR [mm]
180 220 260 300 340 380 500

Przykład zamówienia

MC1250
Typ
•
400
B [mm]
•
RMR
Wariant poprzeczki
•
300
KR [mm]
-
4250
Lk [mm]
HS
Układ poprzeczek

Złączki końcowe Złączki końcowe

Recommended tightening torque: 54 Nm for cheese-head screws ISO 4762 - M10 - 8.8

Connection point
F – fixed point
M – driver

Connection type
U – universal mounting bracket

Przykład zamówienia

UMB
UMB
Złączka końcowa
•
F
•
M
Punkt połączenia
U
U
Typ połączenia

We recommend the use of strain reliefs at the driver and fixed point.

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
F – flange connection

Connection surface
I – connection surface inside
A – connection surface outside

Przykład zamówienia

Plastic/steel
Plastic/steel

End connector

F
M

Connection point

A
A

Connection type

A
I

Connection surface

We recommend the use of strain reliefs at the driver and fixed point.