Skip to main navigation Skip to main content Skip to page footer
Polish
Q040 RE

Q040 RE

Plastic stay RE – screw-in frame stay

Właściwości

  • Plastic profile bars for light to medium loads. Assembly without screws.
  • Available customized in 8 mm sections.
  • Outside/inside: release by rotating 90°.
Poprzeczki co 6 ogniwo,
Poprzeczki co 3 ogniwo
Bi 28 - 284 mm w 8 sekcje szerokości mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">15</td> <td class="hi red">28</td> <td class="hg">40</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 40</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">0.63 - 0.98</td> </tr> </tbody> </table>
Bi [mm] *
28 36 44 52 60 68 76 84 92 100
108 116 124 132 140 148 156 164 172 180
188 196 204 212 220 228 236 244 252 260
268 276 284
* w8 sekcje szerokości mm
KR [mm]
60 75 90 110 150 180

Przykład zamówienia

Q040
Typ
•
108
B [mm]
•
RE
Wariant poprzeczki
•
150
KR [mm]
-
1290
Lk [mm]
HS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

The divider system is mounted on each crossbar as a standard – on every 6th section for stay mounting (HS). As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed by turning the frame stay by 180°. The arresting cams click into place in the locking grids in the crossbar (version B). The groove in the frame stay faces outwards.

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A885.2––
B1485.28–

The dividers are movable within the cross section (version A) or fixed (version B).

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		aT max
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A82085.2–2
B142285.282

The dividers are movable within the cross section (version A) or fixed (version B).

Divider system TS2
with partial height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
B148*/245.2*/21.282

* for VR0

With grid distribution (8 mm grid). The dividers are attached by the height separation, the grid can be moved in the cross section (version A) or fixed (version B).

Przykład zamówienia

TS2
System przegródek
•
A
Wersja
•
3
n
•
K1
•
K4
Komora
•
34
•
38
a
-
VR1
-
VR3
Separacja wysokości

Złączki końcowe Złączki końcowe

Recommended tightening torque: 5 Nm for screws M5 - 8.8

Connection point
F – fixed point
M – driver

Connection type
U – universal end connector

Przykład zamówienia

UMB
UMB
Złączka końcowa
•
F
•
M
Punkt połączenia
U
U
Typ połączenia

We recommend the use of strain reliefs at the driver and fixed point.