Skip to main navigation Skip to main content Skip to page footer
Polish
TKR0150.030

TKR0150.030

Stay variant 030 – with outside opening and detachable crossbars

Właściwości

  • Low-vibration plastic frame with particularly long service life thanks to molded chain links.
  • Swivable and detachable on one side in any position.
  • Outside: Swivable and detachable.
Układ na każdym ogniwie
Bi 20 - 60 mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for even number of chain links
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">15</td> <td class="hi red">22</td> <td class="hg">27.5</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 14</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">0.3 - 0.5</td> </tr> </tbody> </table>
Bi [mm]
20 40 60
KR [mm]
40 50 75

Przykład zamówienia

TKR0150
Typ
•
60
B [mm]
•
030
Wariant poprzeczki
•
75
KR [mm]
-
800
Lk [mm]
VS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

As standard, the divider system is mounted on every 2nd chain link As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

The dividers are easily attached to the stay for applications with transverse accelerations and for applications laying on the side by simply turning them. The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A564––
B6642–

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A564–2
B66422

Przykład zamówienia

TS1
System przegródek
•
A
Wersja
•
3
n
-
VD0
-
VD1
Separacja wysokości

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT ].

If using divider systems with height separation (TS1) please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

Złączki końcowe Złączki końcowe

Recommended tightening torque: 0,6 Nm for screws M4

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside

Przykład zamówienia

Plastic
Plastic
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia

We recommend the use of strain reliefs at the driver and fixed point.