Skip to main navigation Skip to main content Skip to page footer
Polish
Seria UNIFLEX Advanced

Seria UNIFLEX Advanced

Light, quiet all-rounder with a wide range of applications*

* Some features can be different for certain types for design reasons.

  1. Universal mounting bracket (UMB) with integratable strain relief comb
  2. Designs with inside or outside opening stays
  3. Extremely fast and easy to open due to ball joint mechanism
  4. Top-mounted frame stay
  5. Single-part links (type 020)
  6. Favourable ratio of inner to outer width
  7. Many separation options for the cables
  8. Robust double-stroke system for long unsupported lengths
  9. Easy divider fixing
  10. Very quiet through integrated noise damping
  11. Lateral wear surfaces
  12. Single-part end connectors with integratable strain relief comb
Cechy

Cechy

  • Extensive unsupported lengths
  • High torsional rigidity
  • Good ratio of inner to outer width
  • Numerous custom material types for custom applications available
  • Easy assembly and fast cable laying
  • Assembly tools available
  • Stays with ball joint opening on both sides
  • Many possibilities for internal subdivision
  • Wear surfaces for gliding applications with extended travel lengths
Long travel length
Cannot be opened
Opens outward
Opens inward
Sliding dividers
Fixable dividers
Height separation possible
Quiet running/low noise
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Clean room suitable

fig. 1

fig. 2

fig. 1 + fig. 2

Fixable dividers for arrangements rotated by 90° and applications with high lateral accelerations – no additional spacers required

Lateral wear surfaces – for long service life for applications where the carrier is rotated through 90°

Simple fixing of strain relief comb or C-Rail in the connector

Typy
UA1250
  • Wys. wewn. [hi]: 17.5 mm
  • Szer. wewn. [Bi]: 30 - 50 mm
  • Podziałka [t]: 25 mm
  • Gięcie [KR]: 28 - 100 mm
więcej szczegółów
UA1320
  • Wys. wewn. [hi]: 20 mm
  • Szer. wewn. [Bi]: 15 - 65 mm
  • Podziałka [t]: 32 mm
  • Gięcie [KR]: 28 - 125 mm
więcej szczegółów
UA1455
  • Wys. wewn. [hi]: 26 mm
  • Szer. wewn. [Bi]: 25 - 130 mm
  • Podziałka [t]: 45.5 mm
  • Gięcie [KR]: 52 - 200 mm
więcej szczegółów
UA1555
  • Wys. wewn. [hi]: 38 mm
  • Szer. wewn. [Bi]: 50 - 150 mm
  • Podziałka [t]: 55.5 mm
  • Gięcie [KR]: 63 - 200 mm
więcej szczegółów
UA1665
  • Wys. wewn. [hi]: 44 mm
  • Szer. wewn. [Bi]: 50 - 250 mm
  • Podziałka [t]: 66.5 mm
  • Gięcie [KR]: 75 - 300 mm
więcej szczegółów
UA1775
  • Wys. wewn. [hi]: 56 mm
  • Szer. wewn. [Bi]: 100 - 400 mm
  • Podziałka [t]: 77.5 mm
  • Gięcie [KR]: 90 - 340 mm
więcej szczegółów
UA1995
  • Wys. wewn. [hi]: 80 mm
  • Szer. wewn. [Bi]: 66 - 600 mm
  • Podziałka [t]: 99.5 mm
  • Gięcie [KR]: 150 - 500 mm
więcej szczegółów
Typ hi [mm] Bi [mm] t [mm] KR [mm]
UA1250 17.5 30 - 50 25 28 - 100
UA1320 20 15 - 65 32 28 - 125
UA1455 26 25 - 130 45.5 52 - 200
UA1555 38 50 - 150 55.5 63 - 200
UA1665 44 50 - 250 66.5 75 - 300
UA1775 56 100 - 400 77.5 90 - 340
UA1995 80 66 - 600 99.5 150 - 500