MT0650 RDD

Plastic cover RDD – cover with hinge in the outer radius

Vlastnosti

Plastic cover system with hinge for light and medium loads. Assembly without screws.
Available customized in 8 mm sections.
Outside: swivable to both sides.
Inside: release by turning 90°.

Usporiadanie priečok na každom článku (VS: plne priečkované)

B_i 50 - 258 mm v 8 sekcie šírky mm

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

For rough environmental conditions, we recommend the use of OFFROAD glide shoes with 80 % higher wear volume.

Výpočet dĺžky energetickej reťaze

Cable carrier length Lk: Lk ≈ LS/2 + LB

Cable carrier length Lk rounded to pitch t

<table class="table"> <thead> <tr>  <th class="t">t [mm]</th> <th class="hi red">hi [mm]</th> <th class="hg">hG [mm]</th> <th class="hgdash">hG' [mm]</th> <th class="hgdashoffroad">hG' Offroad [mm]</th>   <th class="bk">Bk [mm]</th> <th class="bef">BEF [mm]</th>  <th class="qk">qk [kg/m]</th> </tr> </thead> <tbody> <tr>  <td class="t">65</td> <td class="hi red">38.5</td> <td class="hg">57</td> <td class="hgdash">60.6</td> <td class="hgdashoffroad">62.2</td>   <td class="bk">Bi + 34</td> <td class="bef">Bi + 34</td>  <td class="qk">2.40 - 3.70</td> </tr> </tbody> </table>

B_i [mm] ^*
50	58	66	74	82	90	98	106	114	122
130	138	146	154	162	170	178	186	194	202
210	218	226	234	242	250	258

^* v 8 sekcie šírky mm

KR [mm]
95	115	145	175	220	260	275	300	350

Príklad objednávky

MT0650

Type

•

300

B_i [mm]

•

RDD

Stay variant

•

175

KR [mm]

1430

Lk [mm]

Stay arrangement

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

As a standard, the divider system is assembled at every 2^nd chain link.

For applications with lateral acceleration and laying on the side, the dividers or the complete divider system (dividers with height separations) are fixed in the cross section. The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0
without height separation

Vers.	aT min [mm]	ax min [mm]	ac min [mm]	ax grid [mm]	nT min
B	13	16	11.8	8	–

The dividers are fixed in the cross section (version B).

Divider system TS1
with continuous height separation

Vers.	aT min [mm]	aT max [mm]	ax min [mm]	ac min [mm]	ax grid [mm]	nT min
B	13	21	16	11.8	8	2

The dividers are fixed in the cross section (version B).

Príklad objednávky

TS1

Divider system

•

Version

•

n_T

VD1

VD3

Height separation

Please state the designation of the divider system (TS0, TS1,...), the version, and the number of dividers per cross section [nT].

When using divider systems with height separation (TS1), please additionally state the position (e.g. VD1) viewed from the left driver belt. You are welcome to add a sketch to your order.