QT0250.030
Stay variant 030 – with outside opening crossbars
Vlastnosti
- Weight-optimised plastic frame with particularly high torsional rigidity.
- Crossbars can be opened at any position on one side
- Outside: openable.
Rozmery Rozmery
| Bi [mm] | |
|---|---|
| 30 | 50 |
| KR [mm] | |||||
|---|---|---|---|---|---|
| 28 | 38 | 45 | 60 | 75 | 100 |
Príklad objednávky
Vnútorné rozdelenie Vnútorné rozdelenie
Divider systems
The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).
For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B).
Divider system TS0
without height separation
| Vers. | aT min [mm] | ax min [mm] | ac min [mm] | ax grid [mm] | nT min |
|---|---|---|---|---|---|
| A | 3 | 6 | 4 | – | – |
| B | 3 | 6 | 4 | 2 | – |
Divider system TS1
with continuous height separation
| Vers. | aT min [mm] | ax min [mm] | ac min [mm] | ax grid [mm] | nT min |
|---|---|---|---|---|---|
| A | 3 | 6 | 4 | – | 2 |
| B | 3 | 6 | 4 | 2 | 2 |
Príklad objednávky
Please state the designation of the divider system (TS0, TS1, ...), the version, and the number of dividers per cross section [nT].
When using divider systems with height separation (TS1), please additionally state the position (e.g. VD1) viewed from the left driver belt. You are welcome to add a sketch to your order.
Koncové konektory Koncové konektory
| Bi [mm] | BEF [mm] | nz |
|---|---|---|
| 30 | 40 | 2 |
| 50 | 60 | 2 |
Connection point
F – fixed point
M – driver
Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside