Skip to main navigation Skip to main content Skip to page footer
Slovak
S/SX1800 RM

S/SX1800 RM

Aluminum stay RM – frame stay, solid

Vlastnosti

  • Aluminum profile bars for heavy loads and maximum cable carrier widths. Double threaded joint on both sides “Heavy Duty”.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joints easy to release.
Priečky na každom 2. článku, štandard (HS)
Usporiadanie priečok na každom článku (VS: plne priečkované)
Bk 250 - 1000 mm v 1 sekcie šírky mm

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Výpočet dĺžky energetickej reťaze
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">180</td> <td class="hi red">108</td> <td class="hg">140</td> <td class="hgdash">155</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 188 - 938 </td> <td class="bst red"> 221 - 971 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 29</td> <td class="bef">BSt + 40</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">24.08 - 28.46</td> </tr> </tbody> </table>
* v 1 sekcie šírky mm
KR [mm]
265 320 375 435 490 605 720 890 1,175 1,300

Príklad objednávky

SX1800
Type
•
417
BSt [mm]
•
RM
Stay variant
•
375
KR [mm]
•
St
Material
-
5940
Lk [mm]
HS
Stay arrangement

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

The divider system is mounted on each crossbar as a Standard – on every 2nd chain link for stay mounting (HS).

As a standard, dividers or the complete divider System (dividers with height separations) are movable in the cross section (version A).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A21.52517.5–

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A21.52517.52

The dividers can be moved in the cross section.

Divider system TS3
with height separation consisting of plastic partitions

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A11.516/42*82

* For aluminum partitions

The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.

Aluminum partitions in 1 mm width increments with ax > 42 mm are also available.

ax (center distance of dividers) [mm]

ac (nominal width of inner chamber) [mm]

161823283233384348586468
81015202425303540505660
78808896112128144160176192208 
70728088104120136152168184200 

When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 5 mm). Twin dividers are also suitable for retrofitting in the partition system.

Príklad objednávky

TS3
Divider system
•
A
Version
•
3
nT
•
K1
•
K5
Chamber
•
34
•
38
ax
-
VR1
-
VR3
Height separation

Please state the designation of the divider system (TS0, TS1....). version and number of dividers per cross section [nT]. In addition. please also enter the chambers [K] from left to right. as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1, TS3) please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

Koncové konektory Koncové konektory

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface
I – connection surface inside
A – connection surface outside

Caution: The standard connection variant FAI/MAI is only possible from Bk of 139 mm.

Príklad objednávky

Steel
Steel
End connector
•
F
•
M
Connection point
A
A
Connection type
I
I
Connection surface

We recommend the use of strain reliefs at the driver and fixed point.