Skip to main navigation Skip to main content Skip to page footer
Slovak
S/SX0650 Tubes RMD

S/SX0650 Tubes RMD

Aluminum stay RMD – aluminum cover system

Vlastnosti

  • Bolted aluminum covers for maximum stability.
  • For applications generating chips or coarse contamination.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Usporiadanie priečok na každom článku (VS: plne priečkované)
Bk 100 - 500 mm v 1 sekcie šírky mm

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Výpočet dĺžky energetickej reťaze
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">65</td> <td class="hi red">30</td> <td class="hg">50</td> <td class="hgdash">56</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 65 - 465 </td> <td class="bst red"> 85 - 485 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 15</td> <td class="bef">BSt + 20</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">4.84 - 10.50</td> </tr> </tbody> </table>
* v 1 sekcie šírky mm
KR [mm]
115 125 135 145 155 175 200 250 300 400

Príklad objednávky

SX0650
Type
•
180
BSt [mm]
•
RMD
Stay variant
•
135
KR [mm]
•
St
Material
-
1430
Lk [mm]
VS
Stay arrangement

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

As a standard, the divider system is mounted on every 2nd cover/chain link (HS).

As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A11.51310–

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A11.513102

The dividers can be moved in the cross section.

Príklad objednávky

TS1
Divider system
•
A
Version
•
3
nT
-
VD0
-
VD1
Height separation

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1) please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

The end dividers are part of the divider system and don‘t have to be ordered separately.

Koncové konektory Koncové konektory

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface
A – connection surface inside (standard)
I – connection surface outside

Caution: The standard connection variant FAI/MAI is only possible from Bk of 70 mm.

Príklad objednávky

Steel
Steel
End connector
•
F
•
M
Connection point
A
A
Connection type
I
I
Divider system

We recommend the use of strain reliefs at the driver and fixed point.