Skip to main navigation Skip to main content Skip to page footer
Slovak
S/SX1250 Tubes RMD

S/SX1250 Tubes RMD

Aluminum stay RMD – aluminum cover system

Vlastnosti

  • Bolted aluminum covers for maximum stability.
  • For applications generating chips or coarse contamination.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Usporiadanie priečok na každom článku (VS: plne priečkované)
Bk 150 - 800 mm v 1 sekcie šírky mm

Rozmery Rozmery

<p>The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.</p>
Výpočet dĺžky energetickej reťaze
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">125</td> <td class="hi red">69</td> <td class="hg">94</td> <td class="hgdash">104</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 101 - 751 </td> <td class="bst red"> 126 - 776 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 24</td> <td class="bef">BSt + 30</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">15.48 - 32.38</td> </tr> </tbody> </table>
* v 1 sekcie šírky mm
KR [mm] *
200** 220** 260 300 340 380 420 460 500 540 600 1000
* KR 200 / KR220: geometrically reduced inner height
KR: 200**,220**,260,300,340,380,420,460,500,540,600,1000 mm KR 200 / KR220: geometrically reduced inner height

Príklad objednávky

S1250
Type
•
352
BSt [mm]
•
RMD
Stay variant
•
260
KR [mm]
•
St
Material
-
4750
Lk [mm]
VS
Stay arrangement

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

As a standard, the divider system is mounted on every 2nd cover/chain link (HS).

As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A17.52015–

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A101282

The dividers can be moved in the cross section.

Divider system TS2
with partial height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A11*/17**14*/218*/152

* For VR0
** For version with height separation to the end divider

With grid distribution (1 mm grid). The dividers are attached by the height separation, the grid can be moved in the cross section. 
Sliding dividers are optionally available (thickness of divider = 4 mm).

Príklad objednávky

TS2
Divider system
•
A
Version
•
3
nT
•
K1
•
K4
Chamber
•
34
•
38
ax
-
VR1
-
VR3
Height separation

Koncové konektory Koncové konektory

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface
I – connection surface inside (standard)
A – connecting surface outside

Caution: The standard connection variant FAI/MAI is only possible from Bk of 125 mm.

Príklad objednávky

Steel
Steel
End connector
•
F
•
M
Connection point
A
A
Connection type
I
I
Connection surface

We recommend the use of strain reliefs at the driver and fixed point.